Sản phẩm

Hỗ trợ trực tuyến

nickonlinecuaban_1

nickonlinecuaban_2

skype

Cảm biến lửa - Fireye Viet Nam - TMP Vietnam

Cảm biến lửa - Fireye Viet Nam - TMP Vietnam - anh 1

Click vào ảnh lớn để zoom

Giá : liên hệ

Mô tả

Hãng sản xuất Fireye
Loại Cảm biến lửa
Xuất xứ Đức

Hãy liên hệ với chúng tôi để được hỗ trợ tốt nhất !

Nguyễn Hoàng Tài
Tel: 0915 031 817 or 01686 530 609

Email: sale10@tmpvietnam.com
hoangtai.tmpvietnam@gmail.com

Controls & Flame Safeguard

Fireye^® provides a variety of flame safeguard and combustion controls to the HVAC market place. Our BurnerLogix^®, Flame Monitor^® and MicroM^® families provide safe and reliable light off of packaged burners used on commercial and industrial boilers as well as direct fired make up air units and commercial hot water heaters. Anywhere you are trying to safely control a flame, you will find a Fireye control.

Fireye USA Vietnam	UV Self-Checking Flame Scanner Make: Fireye Model: 45UV5-1000 UV self-checking, 1inch NPT mount, 50 Hz. Use with 25SU3 and 25SU5 45UV5 scanners are self-checking, flame sensing devices 45UV5-1000, Model:1009
Fireye USA Vietnam	UV Self-Checking Flame Scanner Make: Fireye Model: 45UV5-1101 UV self-checking, 1inch BSP mount, 50 Hz. Use with 25SU3 and 25SU5 45UV5 scanners are self-checking, flame sensing devices 45UV5-1101, Model:1009
Fireye USA Vietnam	Infrared Scanner, 8'''''''' Leads, Straight Head Type Make: Fireye Model: 48PT2-1003 Use with D series Control FIREYE® FLAME SCANNERS 48PT2-1003
Fireye USA Vietnam	IR Integreted Flame Scanner Make: Fireye Model: 85IRF1-1QD IR type, Selectable FFRT, with quick disconnect, 10ft connector/cable assembly (Fireye Infra-red FlameWorx module, dual channel - DIN rail mount 48PT2-1003: MBIR-100D)
Fireye USA Vietnam	FlameWorx II Power Supply Module Make: Fireye Model: MBHPS-100D 120 VAC power supply for UV, UV self-check, and FR scanners Bộ nguồn MBHPS-100D
Fireye USA Vietnam	FlameWorx II Power Supply Module Make: Fireye Model: MBLPS-100D 120 VAC power supply for FlameWorx modules. Bộ nguồn MBLPS-100D

BURNERPRO^TM FLAME SAFEGUARD CONTROL

The Fireye BurnerPRO^TM is a compact microprocessor based primary flame safeguard control for single burner applications. The control is designed to provide the proper burner sequencing, ignition and continuous flame monitoring for commercial/industrial heating and process equipment firing oil and gas fuels.

BURNERLOGIX^® Y AND Z FLAME SAFEGUARD CONTROL

BurnerLogix^® Primary Safety Controls provide full function to basic control for all your application needs. BurnerLogix is a small and compact package filled with big features and huge benefits.
Burnerlogix Y provides primary flame safeguard while the Z model adds boiler control to the integrated flame safeguard.

FLAME-MONITOR^®(E110)FLAME SAFEGUARD

The Flame-Monitor^® Flame Safeguard Series provides the proper burner sequencing, ignition and flame monitoring protection on automatically ignited oil, gas and combination fuel burners. On a safety shutdown, the display module will advise the operator that the control is in "Lockout" and indicate the cause as well as the position in the operating sequence that it occurred.

FIREYE MICROM^® SERIES (MEC120) FLAME SAFEGUARD

The Fireye MicroM^® Flame Safeguard controls are compact, modular burner management systems designed to provide automatic ignition and continuous flame monitoring for commercial sized heating and process burners firing any type of fuel.

D-SERIES (70D40, 70D41) BURNER CONTROL

Fireye Series D10, D20 and D30 burner management controls provide ignition and main flame failure protection for automatically ignited oil and gas burners.

BULLETIN

MB SERIES (MB600S) BURNER CONTROL

The Fireye MB SERIES control has been engineered to meet the operational, safety and reliability requirements demanded by the industrial process heat market. It is a fully integrated control, complete with all functions built into one module, offering the opportunity to greatly reduce cost and space requirements normally required by other non-integrated systems.

PF SERIES (MBPF-100S) BURNER CONTROL

The Fireye MBPF-100S and MB600PF provide visual indication and relay output that signal the user regarding flame presence in a combustion chamber. Unique to the module is its ability to use UV or flame rod or both simultaneously.The modules use an inexpensive socket for mounting.

INTOUCH™ WIRELESS MONITOR

The inTouch Wireless Monitoring System was developed to communicate directly with up to ten (10) Flame-Monitor or MicroM flame safeguard controls. In the event of a lockout the inFormationis transmitted to you through the nationwide cellular network, AMPS (Advanced Mobile Phone System), eliminating the need for costly telephone lines. And because inTouch is a cellular device,inStallation time is greatly reduced.

Burner Controls	CONTROLS & FLAME SAFEGUARD	BURNERPROTM FLAME SAFEGUARD CONTROL	BURNERPRO FLAME SAFEGUARD CONTROL
			BURNERPRO REPLACEMENT SAFEGUARD CONTROL
			60-2944-1 WIRING BASE
		BURNERLOGIX® Y AND Z FLAME SAFEGUARD CONTROL	BURNERLOGIX® Y FLAME SAFEGUARD CONTROL
			BURNERLOGIX® Z FLAME SAFEGUARD CONTROL
			YZ300 ANNUNCIATOR
		FLAME-MONITOR® (E110) FLAME SAFEGUARD
		FIREYE MICROM® SERIES (MEC120) FLAME SAFEGUARD
		D-SERIES (70D40, 70D41) BURNER CONTROL
		MB SERIES (MB600S) BURNER CONTROL
		PF SERIES (MBPF-100S) BURNER CONTROL
		INTOUCH™ WIRELESS MONITOR
	EFFICIENCY CONTROLS	NEXUS® PPC4000 PARALLEL POSITIONING
		NEXUS® 6100 INTEGRATED PARALLEL POSITIONING
		NEXUS® PPC6000 PARALLEL POSITIONING
		NEXUS® NXEXP300 WATER LEVEL CONTROL
		NEXUS® NXM2G EFFICIENCY CONTROL