Pneumatic Diaphragm operated 2 Way Control Valve / 3 Way Control Valve

CKD Series (For application temperature up to 220 degrees Celsius)

Precise Regulating with High flow capacity
Large type of trim Top operating design for various duty conditions
In line Repairable Design for easy maintenance
Tight closure even in extreme operating conditions
Multi action type Actuators to meet different application
High flow capacity & range ability
Top operating for easy trim inspection without disturbing the lined.
Designed and tested to deliver 100% performance under specified operating conditions
Wide selection of actuators to meet most requirements
Soft Seating
Manual Over Ride available
MOC : WCB, CF8, CF8M, CF3M etc.

No.	DESCRIPTION	MATERIALS
1	BODY	ASTM A216 / WCB
2	GASKET	S.S.304 SPIRAL WOUND
3	SEAT	S.S 410 / S.S.304
4	VALVE PLUG	S.S 410 / S.S.304
5	CAGE	ASTM A 216 / WCB
6	GASKET	S.S.304 SPIRAL WOUND
7	PIN	S.S.304 / S.S.410
8	STUD + NUT	ASTM A193 / B7-2H
9	BONNET	ASTM A 216 / WCB
10	GLAND PACKING	GRAFOIL
11	GLAND NUT	ASTM A 216 / WCB
12	NUT	ASTM A193 2H
13	SHAFT	S.S 410 / S.S.304
14	PNEUMATIC DIAGHRAM ACTUATOR	--

Pneumatic Diaphragm operated 2-Way Control Valve

MANUAL OVER RIDE TOP OPERATED MANUAL OVER RIDE
TOP OPERATED


	Actuator	: Diaphragm Air to open as a standard.
	Bonnet	: Standard Design Temperature up to 220 degrees Celsius
	Internals	: S.S. 304 [ 316 (Hard facing when required) Other materials on request ]
	Gland Packing	: Grafoil / Teflon
	Trim Design	: Contoured parabolic / Cage guided / Pressure balanced
	Sizes	: 1/2" to 12"
	Characteristic	: Linear
	End Connections	: Flanged end to end ANSI B 16.5 CL 150 [300 / 600 available on request ]
	Pressure Ratings	: ANSI B 16.5 CL 150 / 300 / 600
	Leakage	: ANSI B 16.104 CL VI for metal Seating